FastTrac for the RockAIR, RockDASH, RockFLEET and RockSTAR
Discover FastTrac, the latest innovation in satellite tracking technology, exclusively for RockAir, RockDASH, and RockFLEET devices.
This advanced feature redefines accuracy, capturing GPS positions every 15 seconds – an 800% increase in data points compared with the standard two-minute intervals. Yet, it's not just about more data; it's about smarter data usage. FastTrac bundles these frequent updates and transmits them in efficient two-minute bursts, increasing satellite message consumption by only about 25%.
This means you get higher-frequency, detailed, near-real-time tracking information at 75% less cost.
Find more details here.
How to set up FastTrac(Burst mode).
You will need to have the TP Connect app for iOS or the RockCONNECT app for Android.
If you don't already have the TP Connect app, you will need to download it from the app store.
Once you open the app and you are near the Tracker, your tracker will be discoverable on the app via Bluetooth. You can click on the tracker to connect to it. If it prompts you for a pin, the pin is "1234"
The screen should look like the above picture. From there, click on "Configure" (the two cogs) at the very bottom of the page and toggle on "FastTrac" This is the "Burst" setting.
To fine-tune the tracking rates for this, Click on "custom" The app will prompt you for a pin; the pin is "4321".
Once in, click on "Tracking > Cellular context" and "Tracking > Satellite context" and from there you can configure the "Burst fix rate " and "Burst Transmit rate".
The "Burst Transmit rate" is the rate at which your pings will log into the system, and the "burst fix" is the pings that will get recorded in between the burst transmit.
If you have any further questions or require assistance, please don’t hesitate to contact us via email at support@tracplus.com
